Pic K150 Single Chip Microcomputer Programmer Burner and DownloaderH_es HF

Description

Pic K150 Single Chip Microcomputer Programmer Burner and DownloaderH_es HF
Pickit3 is a development tool that can simulate and download pic online!
Pickit3 is a development tool designed by microchip for beginners to learn, evaluate and develop pic Series MCU, which integrates online simulation and download
Pic Series MCU is connected with pickit3 through ICSP interface
Supported software
Direct support for official microchip IDE (integrated development environment software) MPLAB
Supported devices
Support all pic Series MCU with ICSP interface
The IC supported by pickit3 can be viewed through MPLAB ide v8.92
MPLAB ide v8.92 download address:
Http://www.topsee.com.cn/download/download167.html
Open the software, configure > select device pickit3, and the green light indicates support.
8-bit Devices - PIC10F/12F/16F
PIC10F/12F/16F5X
PIC16F6xx
PIC16F7XX
PIC16F8XX
PIC16F9XX
PIC16F1XXX
8-bit Devices - PIC18F
PIC18CXX/FXX
PIC18F1XXX
PIC18F2XXX/4XXX/6XXX/8XXX
PIC18FXXJ
PIC18FXXK
16-bit Devices
DsPIC30F/33F, PIC24F/H
32-bit Devices
PIC32MX
Characteristic:
Connecting PC with USB interface
Pickit3 development tool embedded driver to achieve high-speed USB communication.
Connection interface with target board
The ICSP standard interface specified by pickit3.
Firmware upgradeable
In the future, microchip will launch more pic models and add new device models to the ICSP device support list. When you need to use the latest model in future development, upgrade kit3 and upgrade firmware program, you can support new models!
Specification:
Model: pickit3
Type: Communication IC
Programming function: can burn flash ROM, EEPROM, etc.
Simulation function: support full speed running, single step debugging, breakpoint debugging and other debugging methods.
Simulation performance: USB interface for simulation debugging, single step debugging, breakpoint debugging, fast response speed!
Programming performance: USB interface, ICSP download, fast download speed!
Tool Description:
The pickit 3 programmer / debugger is a simple, low-cost online debugger controlled by a PC running MPLAB IDE (v8.20 or later) software on a Windows? Platform.
Pickit3 can program and debug almost all series of PIC flash microcontrollers such as microchip pic10 / 12 / 16 / 18 / 24 / 32 and dspic30 / dsPIC33. And pickit3 can program microchip KEELOQ HCS series chips, mcp250xx can chips and EEPROM memory chips.
Compared with pickit2, pickit3 has the advantages of stable simulation, more models and faster support. It can stably support the simulation and download of PIC16 PIC18 PIC24 dsPIC Series MCU.
Contain:
1 set of pickit3 pic programmer
On Jul-06-21 at 07:14:26 PDT, seller added the following information: